63
Configuration
11.6 Set Time (Command Menu)
Command Menu - Set Time
11.6.1 Daylight Saving
[X] DISABLE ->Default
[ ] ENABLE
Use this menu to enable
daylight savings time.
Command Menu - Time Clock
11.6.2 Time Clock
Default
00:00 MON 2000-01-01
Use this menu to set the
time and date. Use the left
and right arrow buttons to
move the cursor to the
desired location in the
display and use the up and
down arrow buttons to
increase or decrease the
values. Press the ENTER
button to accept the
changes and the CANCEL
button to ignore the
changes.
Note: The time is in 24 hour
format.
Command Menu - Time Clock
11.6.3 Compensation
Once the compensation value is entered the
display will be:
Compensation value
can range from -15 to
+15 seconds.
Use the up and down arrow
buttons to select the daily
compensation value and
press ENTER. For a fast
clock adjust negatively. For
a slow clock adjust
positively. For example, for
a clock which runs 5
minutes a month (based on
30 days) fast, select -10
seconds.
1 Daylight Save
2 Time Clock
3 Compensation
Daylight Saving
[X] DISABLE
HH:MM WKD YYYY-MM-DD
00:00 MON 2000-01-01
Daily Compensation:
Panel Config Updated
To Next Page
Loading...
Need help?
General
