Mircom FA-301-12DDR

59
Configuration
Command Menu - FA-300 Config
11.4.1 Inp Zone
Command Menu - FA-300 Config
11.4.2 i
3
Zone
Command Menu - FA-300 Config - Ipt. Zone
1. Type (Initiating circuit)
12.
[X] NON-VERIF ALARM -
>Default
[ ] VERIF ALARM
[ ] SPRKL ALM
[ ] WTR-FLOW ALM
[ ] NON-LATCH SUP
[ ] LATCH SUPV
[ ] GEN ALARM
[ ] BUILDING
[ ] TRB ONLY
Use this menu to select the
circuit type of each input
zone. See "9.4 Circuit
Types" on page 45.
[ ] Zone-1->Default
.
.
.
[ ] Zone-12->Default
Use this function if i
3
devices are present on a
zone. See "10.3 System
Sensor’s i3 Devices" on
page 50.
1 Zone-1
2 Zone-2
--
--
Initiating Zone
12 Zone12
Zone-1 Type
[X] NON-VERIF ALARM
Zone-12 Type
[X] NON-VERIF ALARM
[ ] Zone-1
[ ] Zone-2
--
--
I3 Detection Zones
[ ] Zone-12