Resident Operating Instructions
Version 5.4 TX3 Telephone Access System Installation and Operation Manual 101
LT-969 Copyright 2019
8.2 ADC Resident Operating Instructions
Mircom's state-of-the-art door entry system provides you and your guest with an
increased level of confidence and security.
The TX3 Telephone Access system operates with your existing telephone. Your
guest simply dials your code number or selects your name by scrolling through
the electronic directory on the Entry unit, causing your telephone to ring.
Note: The telephone keypad numbers described in this chapter may be
different for your system. If the keypad numbers do not perform as
described, check with your building administrator to get the correct
values.
8.2.1 Granting Access
When you answer your telephone, you will be in communication with your
guest.
To unlock the main door
• Press " 9 " on your telephone keypad
To unlock the auxiliary door
• Press " 6 " on your telephone keypad
To refuse entry
• Hang up or
• Press “4”
8.2.2 Keyless Entry Codes
The keyless code is a confidential number assigned to each resident by the
building administrator to let you open the front lobby door without using a key.
To unlock the front door
1. Press “0”. The keyless code prompt appears.
2. Enter the keyless code. The front door unlocks.
To Next Page
Loading...