8 TX3 Telephone Access System Installation and Operation Manual Version 5.4
LT-969 Copyright 2019
1 Introduction
This manual provides information about the installation and operation of the
Telephone Access System, and must be read in its entirety before beginning any
installation work.
Installation must be performed by a qualified technician and must adhere to the
standards and special notices set by the local regulatory bodies.
Note: Mircom periodically updates panel firmware and Configurator
Software to add features and correct any minor inconsistencies. For
information about the latest firmware or software visit the Mircom
website at www.mircom.com.
For warranty and special notices information see the Warranty and Special
Notices chapter on page 102.
Warning: The Telephone Access System assembly must be grounded by a
qualified electrician. An improperly grounded unit can result
in equipment malfunction and electrical shock.
This manual explains
• Lobby Control Unit Installation and Operation
• NSL Control Unit Installation and Operation
• Card Reader Unit Integration