Mircom TX3-CX-1NP

16 TX3 Telephone Access System Installation and Operation Manual Version 5.4
LT-969 Copyright 2019
Introduction
• TX3-NSL-8M Master NSL Relay Cabinet with one PS-4P
transformer plug
• 2012K Twelve Telephone Relay Kit with a 2012 Twelve
Telephone Relay board and a 9106 Cable
• RJ-71C Punch Down Block for outdoor applications
TX3-NSL-12K-A/B/C. This is the IP capable version of the TX3-NSL-12K.
The Universal Panel Accessories consist of the following:
Model TX3-UFT. Universal Flush mounting trim for use with TX3-120U, TX3-
200-8U, TX3-1000-8U and TX3-2000-8U. Stainless steel.
Model TX3-USFT. Universal Slim-Line Flush mounting trim for TX3-200-4U.
Stainless steel.
1.3.4 Continental Series
The Continental Series enclosure for Lobby Control Units are flush mounted and
for indoor use only. The following Continental Series models use the Scrolling
Directory:
TX3-120C-A and TX3-120C-C: Electronic Scrolling Directory plus Paper
Directory Lobby Control Unit Kit
• Lighted sign box for directory or bulletins
• 4 Line backlit LCD electronic directory
• Flush mount for indoor applications
• Provisions for postal lock and camera
TX3-200-8C-A and TX3-200-8C-B/C: Electronic Scrolling Directory
Lobby Control Unit Kit
• Eight-line by 20 character LCD display
• Main controller board for 200 residents
• PS-4P Transformer
• Continental Enclosure
• Designed for indoor applications
•IP capable
• Provision for card reader (sold separately) or postal lock (TX3-200-8C-B/
C only)
• Provision for TX3-CX-1NP Single Door Control Module, sold separately
(TX3-200-8C-B/C only)