Mircom TX3 Series - Figure 115 Display Connections on TX3-TOUCH-S15-C and TX3-TOUCH-F15-C; Figure 116 Make Sure that the Arrow Is Visible

Touch Screen Factory Wiring
TX3 Touch Screen Installation Manual 119
Figure 115. Display connections on TX3-TOUCH-S15-C and
TX3-TOUCH-F15-C
Attention: The bottom cable must be connected so that the arrow is on the
outside.
Figure 116. Make sure that the arrow is visible
WX-055: CN27
on PC sub
compact board
WX-117: CN26 on PC
sub compact board
WX-057: CN20 on PC
sub compact board
Arrow