Handset Operations Manual
THE KEYPAD
Use the keypad to enter names or numbers. The figure below shows the available characters
on the handset.
Note: Depending on the selected menu language, other characters can be available.
Therefore, the character order can differ from the table above.
IDLE MODE, AND NUMBER INPUT MODE
When the handset is idle, a short press on a key enters the digits “0” – “9” and the characters
* and #. In number input mode, a long-press on “0” generates a +.
IN TEXT INPUT MODE
While in text input mode a short press on a key 0-9 displays the first available character on
that specific key. The marked character is then selected after a timeout, or when another key
is pressed.
By pressing the *-key it is possible to change the text to be upper/lower case or only numeric
(Abc, abc, ABC, or 123).
Use the 0 to add a space in the text.
SILENT MODE FROM #-KEY
By long-pressing the #-key when the handset is in idle, the handset is set to silent mode, and
a “Sound Off” icon
is shown in the status bar. This feature allows you to turn on silent
mode quickly. To turn off silent mode, you can long-press the #-key or enter the “Audio
settings” menu and disable silent mode from the list.
Note: All audio settings, except the silent mode option, are disabled (greyed out) when the
handset is in silent mode.
10
To Next Page
Loading...
Need help?
General
