Handset Operations Manual
AUTO ANSWER
The “Auto answer” feature makes it possible for the handset to automatically answer an
incoming call. This setting can be set to the following conditions:
• Normal: With this enabled the handset does not answer a call automatically, but the user
must always press the green “Off-hook” key to answer a call. The call is not answered by
removing the handset from the charger.
• Any key: In this mode pressing any key on the keypad (except the red “On-hook” key
and the two softkeys that still have their normal functions) will answer an incoming call.
The call is not answered by removing the handset from the charger.
• Automatic: If the feature “Automatic” is enabled on the handset, then the incoming call is
answered automatically after 5 seconds.
SILENT CHARGING
The “Silent charging” feature can be used to disable ringing during charging. The options are
as follows:
• Off: The handset is ringing when receiving incoming calls (audio alert and incoming call
screen displayed).
• Silent: The handset receives an incoming call as normal, but it does not ring (i.e. no
audio alert but the incoming call screen is displayed).
DO NOT DISTURB
Enable the “Do not disturb” feature when you do not want to be disturbed by calls.
28
To Next Page
Loading...
Need help?
General
