Mitel 112 User Manual

Table of Contents
DEREGISTER
You can deregister a handset the base station. When deregistering a handset, you are
prompted to enter the Access PIN Code (base deregistration PIN). The Access PIN Code
defaults to “0000” and cannot be changed via the handset.
After deregistered is selected, a warning message “Delete registration?” is displayed as seen
above. Accept the deletion by pressing “Yes”. The “No” cancels the operation.
SELECT PBX
In the “Select PBX” menu it is possible to select another PBX for the handset to use.
With this feature it is possible to connect the handset to another PBX than the one used by
the base station system. In this way, the handset can function on a PBX without being
connected to a system of base stations.
SETTINGS
The “Settings” menu is entered through the menu by pressing the selection key in idle.
The “Settings” menu contains the following personal handset settings:
Settings
21

Mitel 112 Specifications

General

Protocols	SIP
Lines	2
Headset Port	Yes
Volume Controls	Yes
Speakerphone	Yes
Wall Mountable	Yes
Ethernet Ports	2 x 10/100 Mbps
Power	PoE