Mitel 112 User Manual

Table of Contents
IDLE CLOCK
The “Idle Clock” function controls if the clock is showed in the idle display or not.
By selecting “Off” the idle clock will not be displayed in idle, and by selecting “On” the clock is
displayed in idle.
AUDIO SETTINGS
The “Audio Settings” menu is entered through the menu by pressing the selection key in
idle. It contains different settings for the sounds and ringing on the handset.
SILENT MODE
The “Silent” profile can either be enabled with the “On” softkey or disabled with the “Off”.
softkey When the “Silent” profile is enabled, no sounds are played on the handset and the
handset does not ring on incoming calls or messages.
In the “Audio settings” menu no other settings can be entered when “Silent” is set to “On”.
31

Mitel 112 Specifications

General

Protocols	SIP
Lines	2
Headset Port	Yes
Volume Controls	Yes
Speakerphone	Yes
Wall Mountable	Yes
Ethernet Ports	2 x 10/100 Mbps
Power	PoE