Mitel 112 - LDAP Mode and Local Mode

Handset Operations Manual
LDAP MODE AND LOCAL MODE
You can set the “Central directory” to LDAP Mode or Local Mode via the web interface of the
base station (see [2] for additional information on this).
When you set the directory to LDAP mode, opening the central directory displays a search
screen as shown below. If you leave the search field empty and press the “Search” softkey,
all the contacts in the central directory are displayed.
Note: When the central directory is in LDAP mode if you press the “Search” softkey, the
handset will return to the “Search” field and you can perform a new search for a. If you press
the red “On-hook” button in the central directory, the handset returns to idle.
If the central directory (instead of LDAP mode) is set to Local mode, opening the central
directory takes you directly to browsing mode. To enter search mode, press the “Search”
softkey as displayed below.
16