Mitel 112 User Manual

Table of Contents
RESET SETTINGS
The handset settings can be reset to default settings by selecting this menu “Reset settings”.
The handset PIN code is required to reset the handset. Following a reset, the handset is still
registered because the base is not reset to default when you select this feature.
STATUS
The menu “Status” provides useful information about the handset and the handset’s base
station.
The displayed information is as follows.
Base station:
- Software version of the base station
- Hardware version of the base station
- IP address of the base station
- MAC address of the base station
- System name of the base stations to which the handset is registered
Handset status:
- Software version of the handset
- Hardware version of the handset
- DECT band in use, for example. EU or US
- Battery level of the handset
- IPEI is a unique, static number that identifies this handset
27

Mitel 112 Specifications

General

Protocols	SIP
Lines	2
Headset Port	Yes
Volume Controls	Yes
Speakerphone	Yes
Wall Mountable	Yes
Ethernet Ports	2 x 10/100 Mbps
Power	PoE