Mitel 470 - Page 236

Operation and Maintenance
236
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
The licence limit for G.729
codecs has been reached.
An attempt was made to set up a G.729 connec-
tion, but there are no free G.729 codecs availa-
ble at present.
Max. number of
licences, date, time
Serious
(negative,
with
match)
The licence limit for Mitel
Dialer has been reached
Mitel Dialer could not be linked to a user
because too few licences are available.
Total purchased
licences, date, time
Normal
(negative,
with
match)
The licence limit for Mitel SIP
terminals has been reached
A Mitel SIP terminal is unable to register or use
the video functionality because there are too few
Mitel SIP Terminals or Mitel 8000i Video Options
licences available.
Parameter 1=1:
Missing Mitel SIP
Term inal s licence,
Parameter 2=1:
Missing Mitel 8000i
Video Options
licence, Parameter
3=3: Max. number of
licences, date, time
Serious
(negative,
with
match)
The licence limit for SIM-
PLE/MSRP has been
reached
A third-party application wishes to use the
MSRP and/or SIMPLE protocol for a user, but
not enough licences are available.
Date, time
Serious
(negative,
with
match)
The licence limit for standard
SIP terminals has been
reached
A standard SIP terminal is unable to register or
use the video functionality because there are too
few SIP Terminals or Video Terminals licences
available.
Parameter 1=1:
Missing SIP Termi-
nals licence, Param-
eter 2=1: Missing
Video Terminals
licence, Parameter
3=3: Max. number of
licences, date, time
Serious
(negative,
with
match)
The licensing limit for the
maximum number of users
has been reached
If in WebAdmin the 37. user is opened and no
Mitel 470 Expansion licence is in place.
Date, time
Serious
(negative,
with
match)
The maximum number of
users is within the licence
limit again
A Mitel 470 Expansion licence is now available
or the number of users has been reduced to 36.
Date, time
Serious
(positive,
with
match)
TLS certificate expires soon A TLS certificate for a SIP node or SIP endpoint
is about to expire (Serious severity level) or has
just expired (Critical severity level) and needs to
be renewed.
If the endpoint type is = 0 (Mitel), then is param-
eter 2 = node ID.
If the endpoint type is = 1 (3rd party), then the
remaining parameter data contains the first
eleven characters of the certificate name.
Type of endpoint
(0: Mitel, 1: 3rd
party), node ID or
certificate name,
date, time
Serious /
Critical
(without
match)
Event message Trigger condition Details
1)
Severity