Mitsubishi FX1N Series Programming Manual

i
FX Series Programmable Controllers
Programming Manual
Manual number : JY992D88101
Manual revision : C
Date : Sep. 2001
FX Series Programmable Controllers
Foreword
• This manual contains text, diagrams and explanations which will guide the reader in
the correct programming and operation of the PLC.
• Before attempting to install or use the PLC this manual should be read and
understood.
• If in doubt at any stage of the installation of the PLC always consult a professional
electrical engineer who is qualified and trained to the local and national standards
which apply to the installation site.
• If in doubt about the operation or use of the PLC please consult the nearest
Mitsubishi Electric distributor.
• This manual is subject to change without notice.

Mitsubishi FX1N Series Specifications

General

Programming Language	Ladder Logic
Output Type	Relay, Transistor
Operating Temperature	0 to 55°C
Power Supply	100-240V AC or 24V DC
Program Capacity	8K steps
Communication Ports	RS-422
Data Memory	8000 words
High-speed Counters	Up to 6 channels
Expansion Modules	Available
Pulse Output	2 points