Mitsubishi FX1N Series Programming Manual

FX Series Programmable Controllers Points Of Technique 10
10-20
10.14.3 Timing diagrams for communications:
1) No Handshaking D8120 (b12, b11, b10) = (0, 0, 0)
1FX
2N below version 2.00
2) Terminal mode D8120 (b12, b11, b10) = (0, 0, 1)
a) Send Only
b) receive only
FX1S
FX1N FX2N
FX2NC
Reset using a program.
When it is not turned off, the
next data cannot be received.
Data 1
RS
instruction
Send wait
flag M8121
Send data
SD (TXD)
OFF
ON
Data 4
Data 2 Data 3
OF
F
ON
Send request
M8122
Receive data
RD (RXD)
Receive
completion
M8123
OFF
ON ON
ONOFF
* This period should
be 100
µ sormore
The receive wait
status is started
Data 1
RS
instruction
Send data
SD (TXD)
OFF
ON
Data 2
Send request
M8122
ON
OFF
Data 1
ER(DTR)
OFF
OFF
ON
ON
DR(DSR)
Reset using a program.
When it is not turned off, the next data cannot be received.
Data 1
OFF
ON
OFF
ON
ON
Data 2
OFF ON
RS
instruction
Receive data
RD (RXD)
ER(DTR)
ON
Receive
completion
M8123

Mitsubishi FX1N Series Specifications

General

Programming Language	Ladder Logic
Output Type	Relay, Transistor
Operating Temperature	0 to 55°C
Power Supply	100-240V AC or 24V DC
Program Capacity	8K steps
Communication Ports	RS-422
Data Memory	8000 words
High-speed Counters	Up to 6 channels
Expansion Modules	Available
Pulse Output	2 points