Mitsubishi FX3UC Series User Manual

260
FX3UC Series Programmable Controllers
User’s Manual - Hardware Edition
9 CC-Link/LT Built-in master ability (Only FX3UC-32MT-LT)
9.5 Combination and mixed use of cables
FX3UC Series Programmable Controllers
User’s Manual - Hardware Edition
3. When the high flexible cable is used as the trunk line
*1. For the processing procedure of the high flexible cable connector (for connecting the terminal
resistor), refer to Subsection 9.8.4.
*2. For the processing procedure of the dedicated flat cable connector (for connecting the terminal
resistor), refer to Subsection 9.8.3.
Trunk line (High flexible cable)
Drop line (Dedicated flat cable)
Drop line
(VCTF cable/High flexible cable)
VCTF/high flexible cable connector
Dedicated flat cable connector
Terminating resistor (CL9-TERM)
Remote
I/O station
Remote
I/O station
Remote
I/O station
Remote
I/O station
Remote
I/O station
Remote
I/O station
Remote
I/O station
Remote
I/O station
Master
unit
power supply
General
(24V DC)
Power supply
adapter
Module
with cable
Commercially
available terminal
200mm (7.87")
or less
*1
*2
*2
*1
*1
*1
*1
*1
*1
*1
*1 *1
*2
Connecting terminating resistor on master unit side
High flexible
cable connector
(For master unit)
cable
High flexible
Terminating resistor (CL9-TERM)
install
High flexible
cable connector
(For terminating resistor)

Mitsubishi FX3UC Series Specifications

General

Brand	Mitsubishi
Model	FX3UC Series
Category	Controller
Language	English