420
FX3UC Series Programmable Controllers
User’s Manual - Hardware Edition
A Version Information and Peripheral Equipment Connect ability
A-3 Other Peripheral Equipment Applicability
Appendix A-3 Other Peripheral Equipment Applicability
Appendix A-3-1 Other Peripheral Equipment Applicability
*1. The F940GOT and ET-940 whose version is former than Ver.1.10 do not support the transparent (2-
port) function of the GX Developer.
Model name Applicability Remarks
GOT1000 Series
Applicable
(From first
product)
The GOT1000 Series is applicable to the device ranges in the
FX
3UC PLCs.
Check the applicability of other items in the GOT manual.
F940WGOT Not applicable The following restriction applies when connected.
Contents of restrictions
• Programming is enabled only in the function ranges such as
instructions, device ranges and program sizes available in the
FX
2N and FX2NC PLCs.
→ For applicable models,
refer to the GOT manual.
• For connection using the 2-port interface function
*1
, it is
necessary for the programming tool to select the model "FX
2N/
FX
2NC", and for the program to cover only the FX2N/FX2NC
PLC function range (support range).
F940GOT F940 Handy GOT Not applicable
F930GOT(-K) Not applicable
F920GOT(-K) Not applicable
ET-940 Not applicable
FX-10DM (-SET0) Not applicable
The following restriction applies when connected.
Contents of restrictions
Programming is enabled only in the function ranges such as
instructions, device ranges and program sizes available in the
FX
2N and FX2NC PLCs.
→ For supported models and device ranges,
refer to the FX-10DM USER'S MANUAL
(Manual No. JY992D86401).
FX-10DU(-E) Not applicable
The following restriction applies when connected.
Contents of restrictions
It is limited to the device range and function range supported by
the highest class model (FX
2N or FX2) applicable in the product
version.
→ For supported models and device ranges,
refer to the FX-10DU-E/FX-20DU-E User’s Manual
(Manual No. JY992D54801).
To Next Page
Loading...
Need help?
General
