Mitsubishi QJ71MB91 User Manual

2 - 1
2.1 Applicable Systems
2
SYSTEM CONFIGURATION
CHAPTER2 SYSTEM CONFIGURATION
This chapter explains the system configuration of the QJ71MB91.
2.1 Applicable Systems
This section describes the applicable systems.
(1) Applicable modules and base units, and No. of modules
(a) When mounted with a CPU module
The table below shows the CPU modules and base units applicable to the
QJ71MB91 and quantities for each CPU model.
Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if the
power supply capacity is insufficient, change the combination of the modules.
: Applicable, : N/A
* 1 Limited within the range of I/O points for the CPU module.
* 2 Can be installed to any I/O slot of a base unit.
(Continued on next page)
Table2.1 Applicable CPU modules and base units, and No. of modules
Applicable CPU module
No. of modules
*1
Base unit
*2
CPU type CPU model
Main base unit
*1
Extension base unit
Programmable
controller CPU
Basic model QCPU
Q00JCPU Up to 8
Q00CPU
Up to 24
Q01CPU
High Performance
model QCPU
Q02CPU
Up to 64
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Process CPU
Q02PHCPU
Up to 64
Q06PHCPU
Q12PHCPU
Q25PHCPU
Redundant CPU
Q12PRHCPU
Up to 53
Q25PRHCPU
Universal model
QCPU
Q00UJCPU Up to 8
Q00UCPU
Up to 24
Q01UCPU
Q02UCPU Up to 36
Q03UDCPU
Up to 64
Q04UDHCPU
Q06UDHCPU
Q10UDHCPU
Q13UDHCPU
Q20UDHCPU
Q26UDHCPU

Mitsubishi QJ71MB91 Specifications

General

Brand	Mitsubishi
Model	QJ71MB91
Category	Controller
Language	English