E X T E R I O R & I N T E R I O R CA R E - 3
CAY M A N 2 0 0 7
54
Black Urethane:
Product Manufacturer Bostik Part # 1100
Used for sealing windshields only. Black
Urethane is available in a tube that applies
similar to silicone. Clean up using solvents such
as paint thinner. Gloves are required as this
considered a hazardous material.
Silicone:
Product Manufacturer Dow Corning Part # 733
Product made in several colors. Primarily
used on the sidewalls around windows, doors,
handles, belt line molding, latches and bases
of surface mounted items such as clearance
lights. Old peeling sealant should be removed
with nylon sticks or equivalent. Metal utensils
can scratch the painted surface. Avoid lacquer
thinners or ketone based solvents as these
chemicals can damage painted surfaces. Con rm
that surface is clean and dry before a new
application. Cut the tube at an angle with the
smallest usable opening. Avoid a heavy bead. A
little goes a long way. Wear a disposable latex
glove and use nger at a 45° angle on beaded
surface to smooth out product. Keep rags or
paper towels handy for clean up. Use care
when applying silicone and plan ahead before
applying. Look for obstacles that may impede
application.
Spray Foam:
This product is used as a sealant where a hole
has been made for items such as water lines
or wires that are coming through a oor or
bulkhead opening.
INTERIOR CARE
Cockpit
The cockpit area dashboard is a molded-
berglass, vinyl-wrapped pod. The instrument
panel is comprised of various gauges and switches.
The dashboard and instrument panel each have
different cleaning requirements. Clean the vinyl
wrapped dash pod following the instructions under
Vinyl Care in this section. In the event a blemish or
small cut occurs in the vinyl, contact a professional
upholstery repair service.
Clean the plastic or Plexiglas® instrument
panels using a cloth dampened in a mild soap
and water solution. Dry using a separate cotton
cloth. Plastic polish products that will help to
brighten the appearance of plastic or Plexiglas
instrument panels are Novus Plastic Care®, a
three-part system; Meguires® and Johnson Paste
Wax®, which will require extensive buf ng and
rubbing.
Glass lens gauges can be cleaned using glass
cleaner. Spray cleaner on the cloth, not directly
onto the lens, to prevent over spray or runoff.
CAUTION:
DO NOT allow glass cleaners to come
in contact with the plastic. Most glass
cleaning products are volatile to plastics,
and will cause it to become brittle or
dull the finish.
TIP:
To determine if the lens is glass or
plastic, tap the lens with a fingernail.
Plastic lens will have a dull hollow
sound whereas glass will have a clear
ping sound.
FABRICS
General Care & Cleaning
Special care needs to be taken when the
motorhome is exposed to a very humid climate
for an extended period of time. Protect the fabric
from any unnecessary exposure to moisture.
Cover all upholstery and make sure window
coverings are down to protect fabrics from sun
damage. Frequently used items require more
attention than those items not regularly used.
If a spill occurs, blot the moisture as quickly
as possible. DO NOT use soap and hot water
as this may set a stain. Clean the spot as soon
as possible.
Cleaning Upholstery Fabrics:
Water-based cleaners are not
recommended.
If a spill does occur, blot the soiled area.
DO NOT rub it.
Some solvents may have an adverse
reaction on a speci c backing of
the upholstery fabric and are not
recommended.
To prevent overall soiling, frequently
vacuum or lightly brush to remove dust
and grime.
Clean spots using a mild water-free
solvent or dry cleaning product.
Clean only in a well ventilated area and
avoid any product containing carbon
tetrachloride or other toxic materials.
Use a professional furniture cleaning
service for overall cleaning.
To Next Page
Loading...