CHASSIS INFORMATION - 10
208
CAY M A N 2 0 0 7
To apply grease:
Clean the grease tting. Initially
operate grease gun until new lubricant
discharges from nozzle, then wipe nozzle
clean to avoid introducing contaminants
into the component.
Snap nozzle onto grease tting. Nozzle
must remain in line with the grease
tting during the application process. If
the nozzle is not in line, lubricant will
collect around nozzle and grease tting,
failing to lubricate the component.
Wrap the nozzle with a paper towel
or rag to prevent contamination and
accidental soiling of other areas.
If the component does not accept grease the
Zerk tting may be plugged or damaged. Zerk
ttings are replaceable and generally available
at most auto supply stores. Zerk ttings come in
a variety of angles depending on the application.
Every effort should be made to lubricate the
component, as neglect will only result in
premature component failure.
NOTE:
Some grease fittings may not be
accessible until the steering wheel is
turned or the motorhome is moved
slightly.
LUBRICATION CHARTS
090368
Typical Zerk Fitting
Front of Chassis
Rear of Chassis
To Next Page
Loading...
