5-20 Radio Programming and Tuning: Front Panel Programming
PTTID TY
(PTT ID Type)
NONE
PRE
POST
BOTH
PTT ID type – None, Pre, Post or Both.
PTTID CH
(PTT ID
Channel)
CH-001 ...
CH-099
ENABLE
DISABLE
Set channel with PTT ID enabled.
PTT TONE
(PTT Side
Tone)
NONE
LONG
SHORT
PTT side tone – No side tone, Long side tone or
Short side tone.
TXPRTIME
(TX Pretime)
0000
0025...
3975
4000
Transmit pretime – duration radio waits, after a
Push-to-Talk (PTT) button press, before
transmitting the DTMF signaling.
0ms – 4000ms with step size of 25ms.
IND ID
(Individual ID)
XXXXXXXX Set Individual ID.
GRP ID
(Group ID)
XXXXXXXX Set Group ID.
ALL ID XXXXXXXX Set All ID.
ACK ID
(Acknowledge
ID)
XXXXXXXX Set Acknowledge ID.
ACK IND
(Acknowledge
for Individual
Call)
CH-001 ...
CH-099
ENABLE
DISABLE
Set channel that enable Acknowledge ID
transmission upon receiving Individual Call.
SEL CAL
(Selective Call
Channel)
CH-001 ...
CH-099
ENABLE
DISABLE
Set channel that enable Selective Call
transmission.
CALL PL
(PL Required
for Call)
CH-001 ...
CH-099
ENABLE
DISABLE
Set channel that enable PL required for call
feature.
When enabled, the radio needs to receive a
matching Call ID as well as a TPL/DPL code in
order to unmute on the current channel.
CL ALERT
(Call Alert
Channel)
CH-001 ...
CH-099
ENABLE
DISABLE
Set channel that enable Call Alert transmission.
SCAN
HANGTIME
**
(Scan Hang
Time)
500
1000 ...
9500
10000
Scan hang time: 500ms – 10000ms with step size
of 500ms.
INT TIME
**
(Scan Interval
Time)
750
1000 ...
4750
5000
Scan interval time: 750ms - 5000ms with step
size of 250ms.
LIST 1
(Scan List 1)
01-XXX
02-XXX ...
15-XXX
16-XXX\
_ _ _
001 ...
099
Set Scan List 1 members.
xxx – selected scan list member
_ _ _ – no scan list member is selected
Table 5-9. Front Panel Programming Mode Parameters (Continued)
Main Menu
1st Level
Sub-Menu
2nd Level
Sub-Menu
Setting Remarks
To Next Page
Loading...
Need help?
General
