Motorola MXP600 - 4.3 Configuring IFR 3901;IFR 3902;IFR 3920 Setup

2 Power Profiles
3 Transmitter Burst Timing Error
4 Vector Error RMS and Peak
5 Transmitter Frequency Error
4.2.2
Call Processing Tests
1 Talk Back
2 Call to Mobile
4.2.3
Duplex Test
Digital Duplex Test (Transmitter)
Measurement Capabilities:
• Bar charts (Transmitter Power, Frequency Error, Vector Error RMS)
• Spectrum Analyzer
• Power Analyzer
• Vector Analyzer
• Vector Diagrams
4.3
Configuring IFR 3901/IFR 3902/IFR 3920 Setup
Procedure:
1 Turn on the IFR.
2 Press CONFIG→CONFIG. Select System→TETRA→MS.
3 Press CONFIG→CONFIG. Select Configure→Channel Plan.
4 Press SELECT→TETRA 380+0MS.
5 Press CONFIG. Select System ID & Access Params.
6 Enter 234 for Mobile Country Code (MCC). Press Enter.
7 Enter 2392 for Mobile Network Code (MNC). Press Enter.
8 Enter 1 for Base Station Color Code (BCC). Press Enter.
9 Enter 06 for Location Area Code (LA). Press Enter.
10 Enter -110 for Min Receiver Level For Access. Press Enter.
11 Enter 30 for Max Transmitter Level. Press Enter.
12 Enter -53 for Access Parameter. Press Enter.
13 Press CONFIG. Select Base Services.
NOTE: You are entering base services setup. The displayed value are factory defaults
and should not be changed.
Power On Registration: Required
Power Off De-registration: Required
Priority Cell: Yes
MN006362A01-AL
Chapter 4 : Test Setup and Testing
37