Motorola MXP600 - Removing the Encoder Knob

7.4.4
Removing the Encoder Knob
Prerequisites: Recommended tools:
• Knob and Back Shroud Opener (part number: TL000146A01)
Procedure:
1 Hold the radio in one hand with the top of the radio facing upwards.
2 Grip the Knob and Back Shroud Opener onto the Encoder knob.
3 With the Knob and Back Shroud Opener firmly latching onto the Encoder knob, push the knob
upwards away until the knob is free from the radio.
MN006362A01-AL
Chapter 7 : Radio Disassembly and Reassembly
86