Glossary
124 10.06.2014
Cycle time
[Parameter of the control unit]
The display contains the times of the individual procedures of the
last packaging procedure.
Delayed ventilation -
Sealing
[Parameter of the control unit]
The ventilation of the chamber begins with a delay after sealing.
Diagonal insert
2
1
Fig. 58: Diagonal insert
1
Pack
2
Diagonal insert
The diagonal insert is used for the optimal positioning of liquid prod-
ucts. As a result of this the product does not spill out of the film
pouch.
Distribution time -
evacuation
[Parameter of the control unit]
Switching interval between the completed evacuation process and
the beginning of the gas flushing process. During the distribution
time remaining air pockets in the products can escape before the
package is sealed.
Distribution time - Gas
flushing
[Optional] [Parameter of the control unit]
Switching interval after the gas flushing process, during which the
gas can distribute itself in the the film pouch.
Double-seam sealing
[Optional]
The double-seam sealing function produces two seal seams.
Double-seam separa-
tion sealing
The double-seam separation sealing function produces two seal
seams. The integrated separating wire severs the pouch trim.
Evacuation
Evacuation is the physical term for creating a vacuum by removing
the air from a space. This reduces the oxygen content, thereby ex-
tending product shelf-life.
Evacuation pressure
[Parameter of the control unit]
Is the pressure to which the film pouch and the chamber are evacu-
ated. The pressure is measured in the chamber.
Factory settings
Factory settings are preset values (default values). The factory set-
tings are stored in recipe 30.
Fill diaphragm
[Parameter of the control unit]
During this time sealing pressure is applied to the sealing dia-
phragm.
To Next Page
Loading...
