Cleaning
Cleaning the machine
80 10.06.2014
NOTICE Danger of material damage!
Penetration by foreign matter (e.g. liquids, product residue, foreign
bodies) will damage the vacuum pump.
Damage can cause faults in the machine, which in turn can result in
reject packs.
¾ Do NOT spray directly on the covers of the suction openings in
the chamber.
¾ Perform manual cleaning of the machine.
¾ Clean the viewing window in the chamber lid with a soft cloth or
a soft brush.
¾ Close chamber lid and lock it in place.
¾ Clean the floor with a rubber wiper.
¾ Dispose of the dirty water and waste properly.
¾ Perform low pressure cleaning of the floor.
¾ Inspect the entire machine and the floor for dirt and cleanser resi-
dues.
¾ If necessary, clean and wipe off again.
Disinfect the machine
and the floor
¾ Perform low pressure disinfection of the floor.
¾ Open the chamber lid.
NOTICE Danger of material damage!
Penetration by foreign matter (e.g. liquids, product residue, foreign
bodies) will damage the vacuum pump.
Damage can cause faults in the machine, which in turn can result in
reject packs.
¾ Do NOT spray directly on the covers of the suction openings in
the chamber.
¾ Perform quick disinfection of the machine.
¾ Leave the chamber lid open to dry.
Complete the cleaning
¾ Remove the plastic bag for protecting sensitive components.
¾ Remove the plastic bag from the mains plug.
To Next Page
Loading...
