Section 75 00-02-0878
2013-03-07 - 165 -
Events A, B, and C
Note: For each event, the function “NOT” can be selected to get an
inverted function.
When opening the roll-down window of the events, this window appears.
Use an alarm to activate.
Same as alarms, only with no time delay on binary inputs.
Events that are not alarms, for example, "Engine Running".
Selected static sync. Functionality.
Command Timers
If the activating (triggering) event is required to be a pulse,
these can be used (1 sec. pulse).
CAN inputs
Status of M-logic functions broadcasted on the power
management CAN line.
Logic
Can be TRUE or FALSE. TRUE means always, FALSE
means never.
Inputs
Direct activation of a binary input. The availability of binary
inputs is option-dependent.
Running modes and plant modes, e.g. "AUTO".
Relays
Activation when a relay activates. The availability of relay
outputs is option-dependent.
Virtual Events
A number of internal (virtual) events that can be activated
from another logic line. By using these virtual events, the
number of activating (triggering) events can be expanded
from the three available in each logic line to, in theory, an
unlimited number of events.
Fail Class
The event activates upon activation of any alarm with the
chosen fail class, for example, "Shut-down".
Events that are related to engine communication.
To Next Page
Loading...
