Section 75 00-02-0878
2013-03-07 - 87 -
RMI Oil
This RMI input is used for measuring the lubricating oil pressure.
Pressure
RMI Sensor Type
Type 1 Type 2 Type 3
Bar psi Ω Ω Ω
0 0 10.0 10.0
0.5 7 27.2
1.0 15 44.9 31.3
1.5 22 62.9
2.0 29 81.0 51.5
2.5 36 99.2
3.0 44 117.1 71.0
3.5 51 134.7
4.0 58 151.9 89.6
4.5 65 168.3
5.0 73 184.0 107.3
6.0 87 124.3
7.0 102 140.4
8.0 116 155.7
9.0 131 170.2
10.0 145 184.0
NOTE: The configurable type is configurable with eight points in
the range 0-480 Ω. The resistance as well as the pressure can be
adjusted.
NOTE: If the RMI input is used as a level switch, then be aware
that no voltage must be connected to the input. If any voltage is
applied to the RMI inputs, it will be damaged.
To Next Page
Loading...
