Why does the media veer during printing on my MUTOH Valuevet VJ-1324?
If the media veers during printing with your MUTOH Printer, ensure you are using the recommended media and that the loading position of the media is correct. Also, verify that the scroller is set correctly.
Why is printing partially stained or incomplete on my MUTOH Valuevet VJ-1324?
If printing is partially stained or incomplete on your MUTOH Printer, it may be due to moisture in the media. Replace it with new media. If the media bends, use the recommended media. When using media other than the dedicated one, set the Vacuum Fan menu.
What to do if ink doesn't come out after initial ink charge on my MUTOH Valuevet VJ-1324?
If ink does not come out after the initial ink charge on your MUTOH Printer, check if the ink cartridge is cold or frozen. If so, leave the ink bag at room temperature for at least three hours and perform cleaning several times. Also, ensure the power was not turned off during the initial ink charge; if it was, turn the power back on and continue the initial ink charge. If normal printing cannot be performed after the initial ink charge, perform cleaning several times and check after each time.
General| Print Resolution | 1440 x 1440 dpi |
|---|---|
| Ink Type | Eco-solvent |
| Media Handling | Roll-to-roll |
| Take-up System | Optional |
| Interface | USB 2.0, Ethernet |
| Number of Nozzles | 180 nozzles per color |
| Media Types | Vinyl, banner |
| Media Thickness | Up to 0.8 mm |
| Power Requirements | AC 100-240V, 50/60Hz |
| Dimensions (W x D x H) | 1200 mm |
| Weight | 150 kg |
| Operating Environment | Temperature: 20°C - 30°C (68°F - 86°F), Humidity: 40% - 60% RH (non-condensing) |
Details CE marking requirements and conformity to EU directives.
Explains FCC compliance for digital devices and interference.
Explains the manual's objective and intended audience for the printer.
Outlines the structure and content of the operation manual chapters.
Lists critical safety precautions for printer installation and use.
Explains the handling, location, and types of warning labels on the printer.
Highlights the main capabilities and benefits of the printer.
Identifies and explains the purpose of various printer components.
Provides instructions for safely connecting the printer's power cable.
Details the procedure for powering the printer on and off.
Guides on installing 220ml ink cartridges and high capacity adapters.
Explains how to load roll media and set it up correctly.
Describes procedures for performing various print tests like nozzle check.
Covers methods for optimizing print quality through adjustments.
Details various functions controllable from the printer's panel.
Discusses media types, handling precautions, and storage.
Lists and describes the various configuration options available in the setup menu.
Configures settings for different media types and print jobs.
Configures automatic cleaning cycles for standby, printing, and pre-printing.
Sets the printer's IP address for network connectivity.
Details replacement of parts like ink cartridges, roll media, and cutters.
Provides instructions for routine cleaning of the printer's parts.
Covers procedures for safely moving and transporting the printer.
Lists common printer issues, their causes, and remedies.
Describes displayed messages, their meanings, and solutions.
Provides step-by-step instructions for removing jammed media.
Lists detailed technical specifications of the printer.
Details the specifications for the printer's network interface.
Visual guide to the setup menu flow for the ready state (part 1).
Visual guide to the setup menu flow for the ready state (part 2).
Visual guide to the setup menu flow for the ready state (part 3).
Visual guide to the setup menu flow for the ready state (part 4).
Visual guide to the setup menu flow during receiving, converting, or printing.
To Next Page