82 Set2: Advanced
Confirm pattern
• Tap [Enter] to carry out printing.
• Look at the print and find the pattern that all the lines appear clean.
• In the example here, the pattern A and pattern C do not have missing lines.
Nozzle Settings
•Tap .
• Use or to choose the pattern that does not have missing lines, then tap [Enter].
• If there is more than one patterns not suffering from missing lines, choose the one that has more nozzles available for
printing.
• ALL has the most available nozzles for printing, followed by A and B, C and D (More ALL > A = B > C = D Less).
• For example, if the pattern A and pattern C do not suffer from blocked nozzles, you should choose A.
To Next Page
Loading...
