196 Maintenance
Snow Tires and Chains
Your MV-1 comes equipped with all-weather treads to provide
traction in rain in snow. In some climates, you may need to use
snow tires and chains.
When selecting snow tires for your MV-1, ensure that the
tires are the same size, load index and speed rating as those
originally provided with the vehicle.
REASON: Use of any tire that is not the recommended
size, load index and speed rating can affect the safety and
performance of your vehicle. This could result in a loss of
vehicle control, leading to serious bodily injury or death. Non-
recommended tires could also cause damage to the
steering, suspension and axle.
If you need to use snow tires and chains, follow these guide-
lines:
• If you hear the chains rub or bang against your vehicle,
stop and retighten the chains. If this does not work,
remove the chains to prevent damage to your vehicle.
CAUTION:
DO NOT use tire chains if your vehicle is
equipped with the optional 20” aluminum wheels.
REASON: The 20” wheels do not leave enough
clearance for the tire chains, which could result in vehicle
damage.
• Avoid fully loading your vehicle, if possible.
• Use only SAE Class S chains.
• Install chains securely, making sure that the chains do not
touch any of the wiring, brake lines or fuel lines.
• Remove the tire chains when they are no longer needed.
Do not use tire chains on dry roads.
If you are driving in slippery conditions that require tire
chains or cables, it is critical that you drive cautiously. Drive
at lower speeds, allow for longer stopping distances and
avoid aggressive steering.
REASON: Slippery conditions may increase the chance
for loss of vehicle control which could lead to serious bodily
injury or death.
To Next Page
Loading...
