74 Seating and Safety Restraints
Jump Seat
Your MV-1 may be equipped with the optional jump seat. The
jump seat is attached to the floor behind the driver’s seat and
faces the rear seats.
The jump seat is NOT designed to be used with a child
safety seat or a booster seat.
REASON: Any child that still needs to use a safety seat
or booster should be properly secured in the rear seats.
To use the jump seat, pull the seat base out completely and
pivot it downward until it locks into place, then lower it until it
is horizontal.
To stow the jump seat, pull up on the seat base, then slide it
back into the stowed position.
To Next Page
Loading...
