Maintenance 219
If necessary, add fluid in 1/2 pint (250 ml) increments through
the filler tube until the level is correct. If an overfill occurs,
excess fluid should be removed by an authorized service cen-
ter.
Do not use supplemental transmission fluid additives, treat-
ments or cleaning agents. The use of these materials may
affect transmission operation and result in damage to internal
transmission components.
BRAKE FLUID
The fluid level will
drop slowly as the
brakes wear, and will
rise when the brake
components are
replaced. Fluid levels
between the “MIN” and
“MAX” lines are within
the normal operating
range; there is no need
to add fluid.
If the fluid levels are
outside of the normal
operating range the per-
formance of the system
could be compromised;
seek service from your
authorized service cen-
ter immediately.
Mobility Ventures rec-
ommends using DOT 3
brake fluid.
To Next Page
Loading...
