EasyManua.ls Logo

MV-1 PT019021 - Ramp Controls - Ramp off Switch

MV-1 PT019021
245 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ramp 121
Ramp Controls - Ramp OFF Switch
Power to the ramp deployment and retrac-
tion switches on the door can be shut off
from inside the vehicle. The Ramp OFF
Switch is in the center console. To disable
the door ramp controls, press the bottom
portion of the Ramp OFF switch. The
top portion of the switch will remain illu-
minated as long as the switch is active.
To enable the door ramp controls, press
The Ramp OFF Switch again. The light
will go out and the door ramp controls will function. Even if the
Ramp OFF Switch is active when the vehicle is shut off, the
door ramp controls will automatically be active the next time the
ramp door controls are pressed, even if the engine is still off.
NOTE:
The Ramp OFF Switch will start flashing after
7,500 cycles as a signal that a ramp adjustment
maintenance is due.

Table of Contents

Related product manuals