Vehicle Controls 69
Climate Control System Operating Tips
To ensure that your MV-1 Climate Control System operates
effectively:
• remove any snow, ice or leaves from the air intake areas at
the base of the windshield.
• do not put objects behind the front seat that will interfere
with the air flow to the back seats.
Follow the tips below and on the next page for suggestions on
the best settings for various weather conditions.
Window Fogging - In mild, but rainy or humid weather, win-
dows may fog on the inside. To clear the fog off all the win-
dows, turn on the air conditioning. Adjust the temperature and
fan control to maintain comfort. Position the Air Flow Selec-
tion dial to “Defrost” to quickly remove windshield fogging.
Summer Operation - Air-conditioned vehicles must be pro-
tected with a high-quality antifreeze/coolant during summer to
provide corrosion protection and to raise the boiling point of
the coolant for protection against overheating. A 50% concen-
tration is recommended. For best performance in very hot and/
or humid conditions, the system should be operated in the Max
A/C mode.
Winter Operation - When operating the climate control sys-
tem in winter weather, make sure the air intake is free of ice,
slush, snow or other obstructions. Set the blower speed to low
until the engine heats up.
To Next Page
Loading...
