114 Ramp
This warning sticker, affixed to the door next to the ramp switches,
outlines the safety procedures you should follow while using the
power ramp.
Ramp Deployment
• Place the vehicle in PARK.
NOTE:
The ramp will not function if the vehicle is not in
park.
NOTE: The ramp will not function if the vehicle is running
and the Ramp OFF switch, located in the center switch bank
under the HVAC controls, is activated. See Ramp Controls -
Ramp OFF Switch on page 121.
• Engage the parking brake.
• Open the right rear door to the full open position. Make
sure there is at least 60 in (152.4 am) of clearance around
the ramp deployment area.
Check to make sure path for the ramp deployment is clear of
people and objects.
REASON: Damage to the ramp mechanism or serious
personal injury could result.
• Select the deploy length (SHORT RAMP or LONG
RAMP) with the selector switch located along the right
rear door edge.
• Press and hold the OUT portion of the Ramp Deploy
rocker switch, located on the right rear door edge.
To Next Page
Loading...
