PreparationGT10/GT30
195
1.4 Procedures for Using GTWIN
5. Open a base screen from the Screen Manager.
With the above step, preparation is now complete. The “Screen Manager” indicatesthe
screenfileitself,andthenumeroussmallbuttonseachindicateanindividualbasescreen
(screen creation screen).
Opening and closing base screens
Either double-click on the button for the number of the screen to be created, or select
the button and click on [Open]. This opens the base screen.
Clicking on the [Close] button
of the base screen closes the screen. If a screen has
been created on the base screen, the contents of the screen will be saved to the
computer memory, and a red mark will appear on the button.
Copying, moving, and deleting base screens
Select the base screen to be copied, moved, or deleted, and then press the “Copy”,
“Move”, or “Delete” button. Multiple screens can be selected (simply select them
consecutively). (They are possible between different screen files, however.)
Displaying the Screen Manager
To display the Screen Manager, select whether a map-type (default) or a list-type
display is preferred. Then select “View (V)” on the menu bar, followed by “Screen
ManagerDisplayMethod”.Selectthepreferredmethod.Ifalist-typedisplayisselected,
use “Base Screen” on the menu bar and then “Set Screen Attributes” to display a list of
names.
6. Create the text and graphics for the screen.
To create text and graphics on a base screen, use the “Toolbox” under the tool bar.
Writing text
Clickingonthe[Text] button
inthetoolboxchangesthemousepointertoan “I”mark,
enabling text input at any desiredpoint onthe base screen. To exit from the inputmode,
click on the “Select”
button.
To change the text size and the color, use the [Font] button
.
Drawing graphics
The buttons in the toolbox can be used to draw graphics. To exit from the input mode,
click on the “Select”
button.
To change the color, use the [Graphic Color] button
, and to change the type of line,
use the [Line Type] button
.
Filling in enclosed fields
Clicking on the [Fill] button
fills in a field enclosed by lines.
To Next Page
Loading...