CHAPTER 2 INSTALLATION
– 73 –
NWA-008855-001 Rev.1.0
avch2001.fm
<IP Address of Secondary DRS>
NOTE: Set the IP Address of secondary DRS only when secondary DRS is provided.
Command: set drssip
Example:
IP Address of secondary DRS: 10.41.207.31.
The “set done” message is indicated when the IP-CS has received the assigned data normally.
Assigned data can be read by entering “show drssip” command.
Set “0.0.0.0.” when you delete the IP Address.
(e) Load the assigned data
By rebooting IP-CS, the assigned data is loaded and becomes effective.
Command: reboot
>set drssip 10.41.207.31
>reboot
SETUP OF IP-CS
To Next Page
Loading...
