NEC Univerge SV9300 Series - To Register Personal Directory

TO REGISTER PERSONAL
DIRECT
ORY
Following explains how to register the called party
into the personal directory.
1. Press Soft key (DIR).
MARY SMITH [200]
4:26 PM MON 11 MAY 2015
MIC DIR HIST. >>>>
2. Press Personal Soft key
.
00: JAMES SMITH
81XXXXXXXXXX
Back ENTRY ↑P
rev ↓Next
3. Search the vacant area of directory
.
Select one of the following operations.
• Press
.
•
Press Soft key (↑Prev) or Soft key
(↓Next).
03:
Back ENTRY ↑P
rev ↓Next
4. Register the information of the
called party.
Press or Soft key (ENTRY).
03:
NAME NUMBER DEL OK
5. Press or Soft key (NAME) and
then register the name.
Up to 16 characters can be registered for
each name.
Please refer to “T
ABLE OF INPUT
CHARACTERS” on page 103 for the
character that can be entered.
When returning to the previous screen,
press or Soft key (CANCEL).
When erasing a character,
press Soft key (BK).
6. Press or Soft key (SET).
NAME : SMIT
(ABC) CANCEL BK SET
7. Press or Soft key (SET) to
register the dial number
.
Up to 30 digits
can be registered for each dial
number.
(access code: up to
4 digits, called number:
up to 26 digits)
8. Press or Soft key (SET).
NUMBER : 201
SMIT
CANCEL BK SET
If it is not necessary to register the dial
number just press or Soft key (SET)
without entering the dial number
.
When returning to the previous screen,
press or Soft key (CANCEL).
When erasing a character,
press
or Soft key (BK).
DIAL BY NAME (DIRECTORY SEARCH)
96