RETURN MESSAGE
SCHEDULE
This feature allows terminal user to register a
return schedule when leaving the of
fice and have
the schedule display on the calling terminal LCD.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator
.
TO SET
1. Press Speaker key
.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Return Message Schedule
access code or press Return
Message Schedule feature key
.
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
3. Dial the number corresponding to
desired message.
Message Patterns
DIAL MESSAGE
0 IN: BACK HH: MM
1 OUT: BACK HH: MM
2 AWAY: BACK MM: DD
3 VACATION MM: DD
• Press or and dial desired time.
IN:BACK
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
• Press or and dial the month and
date (Example: for June, 8, enter
“0608”).
AWAY:BACK
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
4. Press Speaker key
.
Speaker key lamp goes off. →
Return Message Schedule is registered.
TO CANCEL
1. Press Speaker key
.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Return Message Schedule
cancel code.
3. Press Speaker key
.
Speaker key lamp goes off. →
FEATURE OPERATION
86
To Next Page
Loading...
