CALL FORWARDING -
DESTINA
TION
This feature allows a station user to set Call
Forwarding - All Calls from another station within
the system.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator
.
TO SET CALL FORWARDING -
DESTINATION
1. Dial Call Forwarding - Destination
feature access code or press Call
Forwarding - Destination feature
key
.
You will receive a special dial tone.
SET 201
4:26 PM MON 11 MAY 2015
2. Dial
station number to be forwarded
to this line.
Wait for service set tone.
TO CANCEL CALL
FORWARDING -
DESTINATION
1. Dial Call Forwarding - Destination
Cancel feature access code or press
Call Forwarding - Destination
Cancel feature key.
CANCEL 201
4:26 PM MON 11 MAY 2015
2. Dial station number to cancel.
3. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Call Forwarding - Destination is cancelled.
CID (CALLER ID) CALL
DISPLA
Y
Without answering incoming calls or held calls that
terminate to the Line keys of a terminal, the calling
party’s information can be confirmed by the
indications on the LCD.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator
.
TO DISPLAY CALLING PARTY
INFORMATION
1. Press CID Call Display feature key
.
Line key lamp lights red. →
Calling Party information is displayed.
201
JAMES SMITH
R-TONE MIC
TO REDISPLAY CALLING
PARTY INFORMATION
1. While on a call press CID Call
Display feature key to recall the
Calling Party Information.
Calling Party information is displayed.
FEATURE OPERATION
79
To Next Page
Loading...
