WHISPER PAGE
This
feature allows a secretary to interrupt the boss
in a private way. By pressing a feature key or
dialing an access code, the secretary terminal can
interrupt the conversation between the boss and
another party. When the conversation is
interrupted, the boss can hear the secretary but the
other party is unaware of the voice override.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator
.
TO SET
Whisper Page has two kinds of operations.
PATTERN 1
1. Press Speaker key
.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial desired extension number
.
You will receive a busy tone.
BUSY 201
4:26 PM MON 11 MAY 2015
CB CW >>>>
3. Press T
ransfer key.
4:26 PM MON 11 MAY 2015
CB CW >>>>
4. Dial Whisper Page access code or
press Whisper Page feature key
.
You will receive a service set tone.
201
4:26 PM MON 11 MAY 2015
Recall VOICE CB >>>>
5. Listen to conversation and speak to
boss terminal only
.
CALL WAITING 201
4:26 PM MON 11 MAY 2015
MIC CONF Recall
PATTERN 2
1. Press Speaker key
.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Whisper Page access code or
press Whisper Page feature key
.
You will receive a feature dial tone.
4:26 PM MON 11 MAY 2015
CB CW >>>>
3. Dial desired extension number
.
You will receive a service set tone.
201
4:26 PM MON 11 MAY 2015
Recall VOICE CB >>>>
4. Listen to conversation and speak to
called terminal only
.
CALL WAITING 201
4:26 PM MON 11 MAY 2015
MIC CONF Recall
TO ANSWER
1. Press Answer key
.
Call in progress is placed on hold.
A hold tone is not transmitted to the other
party of the original call.
Calling terminal and called terminal can
privately speak.
Answer key lamp lights red. →
CW 201
4:26 PM MON 11 MAY 2015
MIC Mute
FEATURE OPERATION
87
To Next Page
Loading...
