MAKING A CALL
This section explains Preset Dialing. Before
making a call, the terminal user can verify the
dialed number displayed on the LCD. When a
wrong
number is entered, the user can correct the
number before originating the call.
TO MAKE AN EXTERNAL
CALL
Following explains how to make an external call.
1. Dial a desired number after dial the
Central Office access code, e.g.
.
81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
BK
2. Press Speaker key
.
Originate a call.
Speaker key lamp lights red. →
TO MAKE AN INTERNAL CALL
Following explains how to make an internal call.
1. Dial a desired number
.
81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
Recall VOICE CB >>>>
2. Press Speaker key
.
Originate a call.
Speaker key lamp lights red. →
ANSWERING A CALL
This section explains how to answer a call with
Answer key
.
TO ANSWER AN EXTERNAL
CALL
1. While hearing a ringing tone,
Call Indicator Lamp lights red.
Answer key lamp lights red. →
Line key lamp lights red. →
2. Press Answer key
.
Call Indicator Lamp goes off.
Answer key lamp lights green. →
Speaker key lamp lights red. →
Line key lamp lights green. →
3. Lift the handset to answer the call.
0:00:05 26-255XX
4:26 PM MON 11 MAY 2015
MIC
It is possible to answer a call by pressing Line
key that is flashing instead of Answer key
.
It is possible to answer a call by lifting
handset and then pressing Answer key or
Line key
.
TO ANSWER AN INTERNAL
CALL
1. While hearing a ringing tone,
Call Indicator Lamp lights red.
Answer key lamp lights red. →
Line key lamp lights red. →
2. Press Answer key
.
Call Indicator Lamp goes off.
Answer key lamp lights green. →
Speaker key lamp lights red. →
Line key lamp lights green. →
FEATURE OPERATION
56
To Next Page
Loading...
