THREE/FOUR-PARTY
CONFERENCE
This feature provides a terminal user the ability to
add-on
another party to a call already in progress.
This feature is set by Soft key or feature key.
The
feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. While extension A (200) and
extension B (201) are engaged in a
T
wo-party connection.
Example: Add the ext. C to conversation.
201
4:26 PM MON 11 MAY 2015
MIC Mute
2. Extension A presses T
ransfer key.
Ext. A will receive a special dial tone.
Ext. B will receive a Music on Hold.
4:26 PM MON 11 MAY 2015
3. Extension A dials the number of
Extension C (210).
210
4:26 PM MON 11 MAY 2015
Recall VOICE >>>>
4. Extension C answers the transfer
call.
210
4:26 PM MON 11 MAY 2015
MIC CONF Recall
5. Extension A presses Soft key
(CONF) or Three/Four-Party
Conference feature key
.
CONF 201 210
4:26 PM MON 11 MAY 2015
MIC Mute
PRESET ANSWER
It is possible to respond by simply lifting up the
handset of the terminal as usual telephone.
TO SET PRESET ANSWER
1. While Answer key lamp goes off →
,
2. Press Feature key
.
Feature key lamp lights red. →
3. Press Answer key
.
Feature key lamp goes off. →
Answer key lamp lights red. →
ANSWER TO A CALL WITH
PRESET ANSWER
1. Ringing and the Call Indicator Lamp
flashing.
2. Lift the handset.
Call Indicator Lamp goes off.
TO CANCEL
1. While
Answer key lamp lights red →
,
2. Press Feature key
.
Feature key lamp lights red. →
3. Press Answer key
.
Feature key lamp goes off. →
Answer key lamp goes off. →
FEATURE OPERATION
64
To Next Page
Loading...
