6. Select “ Backlight Fade Control”.
Select one of the following operations.
• Press , or Soft key (OK).
•
Press
.
1
Backlight Fade Control
↑ Back OK
7. Select whether to turn On/Off the
LCD smoothly
.
Select one of the following operations.
• Highlight an item by using
, and press
or Soft key (OK).
•
Press
or , and press or Soft
key (OK).
1
Disable
2
Enable
↓ Back OK
TO SET A LANGUAGE
The language is set by system data setting
at initial installation.
Therefore, it is not required to change the
language on the terminal from default setting
( Automatic). For details, please contact
the system administrator
.
TERMINAL SETUP
37
To Next Page
Loading...
