TIMED REMINDER
This feature allows the system to be programmed
to automatically call terminals at specified times.
Upon answering, the terminal is connected to a
recorded announcement or music source.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator
.
TO SET
1. Press Speaker key
.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Set T
imed Reminder.
Dial Timed Reminder feature access code or
press Timed Reminder feature key.
You will receive a feature dial tone.
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
3. Dial the desired reminder time in
military format.
Y
ou will receive service set tone.
SET 0900
4:26 PM MON 11 MAY 2015
4. Press Speaker key
.
Speaker key lamp goes off. →
PRIVACY RELEASE
A terminal is engaged in a conversation, and
allows another terminal to enter the call in
progress.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator
.
1. Press Soft key (CONF) or
Conference feature key
.
Line key lamp lights green. →
201
4:26 PM MON 11 MAY 2015
MIC CONF Recall
2. Another terminal with the same line
appearance presses that Line key
.
CONF 201 301
Mary
MIC Mute
3. A three-way conference is
established.
CONF 201 301
4:26 PM MON 11 MAY 2015
MIC Mute
FEATURE OPERATION
85
To Next Page
Loading...
