NEC Univerge SV9300 Series - LCD Backlight Fade Control

6. Select whether to turn On/Off of the
LCD Back light.
Select one of the following operations.
• Highlight
an item by using
, and press
or Soft key (OK).
•
Press
or , and press or Soft
key (OK).
1
Disable
2
Enable
↓ Back OK
The lighting time of back light is set by system
data setting at initial installation. (The initial
setting is 10 seconds.) For details, please
contact the system administrator
.
TO ENABLE/DISABLE LCD
BACKLIGHT F
ADE
CONTROL
Following explains how to set Backlight Fade
Control. When you set Backlight Fade Control as
“Enable”, LCD is smoothly turned On/Off.
1. Press
Menu
key to display the
Menu Screen.
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ User Setting”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
1
User Setting
2
Download
↓ Back OK
4. Select “ Display”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
3
Display
4
Change Password
↑ ↓ Back OK
5. Select “ Advanced”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
6
Advanced
↑ Back OK
TERMINAL SETUP
36