NEC Univerge SV9300 Series - Display and Soft Keys

DISPLAY
Displays LCD information sent from the system. (Extension number
, calendar, time, soft key etc.)
SOFT KEYS
Soft keys provide a set of functions on the LCD that adapts to the changing state of the terminal.
Patterns and names of Soft keys to be displayed are set at initial
installation. For details, please contact the system administrator
.
EXAMPLE OF SOFT KEY FOR EACH STATUS
The Soft keys appear corresponding to the services that are available depending on the state of the terminal. The
following is an example display of the Soft key that corresponds to the state of the terminal.
•
IDLE STATUS
MARY SMITH [200]
4:26 PM MON 11 MAY 2015
MIC DIR HIST. >>>>
• HEARING DIAL TONE/DIALING
200
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
Push Soft key (>>>>)
200
4:26 PM MON 11 MAY 2015
FDA FDN DND >>>>
• CALL IS TERMINATED AND RINGING
201
4:26 PM MON 11 MAY 2015
Recall VOICE CB >>>>
• CALLED PARTY IS BUSY
BUSY 201
4:26 PM MON 11 MAY 2015
CB CW >>>>
• CALL IS IN PROGRESS
201
4:26 PM MON 11 MAY 2015
MIC Mute
INTRODUCTION
16