LAST NUMBER REDIAL
It is possible to search and redial the phone
number up to 60 calls previously dialed.
1. Press or Soft key (OG) after press
Soft key (HIST
.) .
Speaker key lamp lights red. →
Line key lamp lights green. →
11 MAY 4:26 JOHN SMITH
81XXXXXXXXXX
<<<< Redial ↑P
rev ↓Next
2. Press Soft key (￪Prev) or Soft key
(￬Next) to find desired number and
press .
The
number on LCD is automatically redialed.
81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
Recall VOICE CB >>>>
3. When party has answered, lift the
handset.
Speaker key lamp goes of
f. →
0:00:05 26-255XX
4:26 PM MON 11 MAY 2015
MIC Mute
ONE-TOUCH SPEED
CALLING KEYS
This feature allows a terminal user to dial
frequently-called numbers by pressing a One-
touch key assigned for Station Speed Dialing.
Up to 32 digits
can be registered for each dial
number.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator
.
TO PROGRAM
Following explains how to register phone number
to a One-touch Speed Calling key
.
1. Press Feature key.
Feature key lamp lights red. →
2. Press One-touch Speed Calling key
.
Feature key lamp flashes red. →
Speaker key lamp lights red. →
3. Dial a desired number
.
81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
4. Press Feature key
.
Feature key lamp goes off. →
Speaker key lamp goes off. →
SET
4:26 PM MON 11 MAY 2015
MIC DIR HIST. >>>>
If you dial a wrong number, you will need to
start again from the beginning.
To register a pause, press between any
digits. The pause can not be registered as a
first digit.
FEATURE OPERATION
61
To Next Page
Loading...
