ANSWER TO A TRANSFERRED
CALL (BY EX. 210)
1. Ringing is heard.
Call Indicator Lamp flashes.
Line key lamp flashes red. →
The extension number that initiates call
transfer is displayed on the LCD.
200
4:26 PM MON 11 MAY 2015
R-TONE MIC
2. Lift the handset to start a
conversation with the extension
(200).
Call Indicator Lamp goes of
f.
Line key lamp lights green. →
3. Start conversation with transferred
party
.
• Extension (200) replaces the handset.
0:00:05 DDD
4:26 PM MON 11 MAY 2015
MIC Mute
TO TRANSFER A CALL
(WITHOUT ANNOUNCEMENT)
After dialing the transfer destination number, it is
possible
to replace a handset before answering the
destination party. When the transfer destination
party lifts the handset, it is automatically connected
with transferred party. The phone number of
transferred party is displayed on the destination
terminal.
INITIATE TRANSFER (BY EX. 200)
1. Call in progress.
Line key lamp lights green. →
2. Press T
ransfer key.
You will receive a special dial tone.
Calling party is placed on hold.
0:00:05 26-255XX
4:26 PM MON 11 MAY 2015
MIC Mute
3. Dial the destination extension
number
.
You will receive a dial tone.
The dialed extension number is displayed
with flash.
210
4:26 PM MON 11 MAY 2015
Recall VOICE >>>>
4. Replace the handset.
Line key lamp goes of
f. →
A call is transferred.
ANSWER TO A TRANSFERRED
CALL (BY EX. 210)
1. Ringing is heard.
Call Indicator Lamp flashes.
Line key lamp flashes red. →
The extension number that initiates call
transfer is displayed on the LCD.
200
4:26 PM MON 11 MAY 2015
R-TONE MIC
2. Lift the handset and start
conversation with transferred party
.
Call Indicator Lamp goes off.
Line key lamp lights green. →
0:00:05 DDD
4:26 PM MON 11 MAY 2015
MIC Mute
When the destination party does not answer
within the predetermined time, a recall is
made to the terminal that initiates call
transfer
. When recall is received, the
destination number is displayed on the LCD.
RECALL 210 DDD
4:26 PM MON 11 MAY 2015
MIC DIR HIST. >>>>
FEATURE OPERATION
60
To Next Page
Loading...
