TO CHANGE PASSWORD
Following explains how to change an existing
password. The password is used for the following
occasions.
•
To lock/unlock the terminal.
• To reset the terminal settings.
Depending on the System Configuration, the
expiration
date of password can be specified.
When the expiration date has passed, the
following error message is displayed on the
Desktop screen. For details, please contact
the system administrator.
Password Expired!
Please change your password.
OK
1. Press
key to display the
Menu Screen.
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ User Setting”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
1
User Setting
2
Download
↓ Back OK
4. Select “ Change Password”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
3
Display
4
Change Password
↑ ↓ Back OK
5. Enter the old password.
After
entering the old password, press
or
Soft key (Set).
Old Pass
New Pass 1
BK Set Cancel OK
The initial password is “0000”. When
changing the password for the first time,
enter “0000” as the old password.
In
order to ensure the security and avoid the
unauthorized use, please be sure to change
the password at the time of initial use. The
password shall be difficult to guess from a
third party. And it shall be changed regularly
to keep security level.
6. Enter the new password.
After
entering the new password, press
or
Soft key (Set).
Old Pass
****
New Pass 1
BK Set Cancel OK
Up to 32 digits can be set as a password.
7. Enter the new password again.
Retry Pass
1
BK Set Cancel OK
TERMINAL SETUP
38
To Next Page
Loading...
